Matala Pond Pumps

Geyser Hi-Flow

Free Shipping on orders over $100

Applications:

• Large Waterfall, fountain, and garden spraying.
• To irrigate or discharge water from farmland or ponds.
• For use to discharge rainwater.
• Sump pit, and washed water handling.
• 10mm hole size in strainer
• 3 inch outflow

Pump	HP	Amps	Outlet Size	Max Flow GPH	5’ Head	15’ Head	20’Head	25”Head	Max Head
GHF-9000	1.0	10.9	3”	9500	8800	6400	4400	2100	31.0 ft
GHF-13000	1.5	12	3”	13200	12500	8400	6200	3400	33.0 ft

GeyserFlow

Free Shipping on orders over $100

Applications:

• To irrigate or discharge water from farmland or ponds.
• For use at relay pumping stations or manhole to relay raw water.
• For livestock production facilities, to discharge sewage.
• For use to discharge rainwater.
• Waterfall, fountain, and garden spraying.
• Sump pit, and washed water handling.

Pump	HP	Amps	Outlet Size	Max Flow GPH	5’ Head	10’ Head	15’Head	20”Head	Max Head
GeyserFlo2300	1/4	3.3	1.25”	2320	2205	1828	1246	388	25.0 ft
GeyserFlo3500	1/3	4.4	1.5”	3470	3330	2855	2119	1119	28.7 ft
GeyserFlo4200	1/2	5.1	2”	4200	4051	3544	2825	1857	30.1 ft
GeyserFlo4900	3/4	7.5	2”	4890	4831	4483	3949	3127	34.5 ft
GeyserFlo6300	1.0	7.6	2"	6290	6093	5918	5132	4199	37.7 ft

Semi Vortex

Free Shipping on orders over $100

Make water alive with the Matala Semi Vortex Sewage Pumps.  The pumps include a Semi-vortex urethane rubber impeller which suspends solids and allows for pumping of sand and stringy material. 

Matala Semi Vortex Sewage Pumps are highly efficient, featuring a continuous-duty air-filled copper-wound motor with class F, and insulation all of which minimizes the cost of operation.

Features & Benefits:

• Built in thermal protection prevents motor failure due to overloading, accidental run-dry and single phasing or three phase units.
• Double inside mechanical seals running in an oil-filled chamber provide for one of the most durable seal designs available.
• Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extended operational life.
• An agitator impeller installed on the extension of the pump shaft.  This not only prevents "air locking" but also reduces clogging when solid objects are sucked in.

Applications:

• Residential, commercial, industrial dewatering and site drainage
• Sediment removal from small sumps of basins
• On-site wastewater submersible water pumps

Pump Model	SVS-400	SVS-750
Output	1/2 HP, 400W	1 HP, 750W
Discharge	2"	2"
Maximum Head	12.6M/41.4 ft	18.4M/60.3ft
Maximum Capacity	238lpm/63gpm	356LPM/94gpm
Free Pass Solid	10mm	10mm

VersiFlow

Free Shipping on orders over $100

The Versiflow line of pumps from Matala are excellent for Heavy and continuous flow duty.  The Versiflow can be installed Vertically or Horizontally, are fully submersible and handle solids like a champ.

Features:

• Heavy and continuous duty
• Solids Handling
• Vertical or horizontal installation.
• Submersible
• 2 inch outflow

Applications:

• To sprinkle or discharge rain water from farmland
• For use at relay pump stations or manhole to relay raw water
• waterfall, fountain, pond and garden spraying
• Sump pit, and waste water handling

	HP	Amps	Outlet Size	Max Flow GPH	5’ Head	10’ Head	15’ Head	20' Head	Max Head
VersiFlo3200	1/5	2.8	2"	3240	2931	2092	867		19'
VersiFlo3900	1/3	3.2	2"	3850	3648	2748	1428	51	23'
VersiFlo4700	1/2	5.3	2"	4690	4256	3538	2707	1789	30'
VersiFlo5600	1	7.3	2"	5600	5514	5409	5046	4130	38'

.